Briggs & Stratton 5900834 ユーザーズマニュアル

 8.  Locate the wire harness disconnect points under 

the right instrument control panel.  Disconnect the 
wire harnesses by squeezing the quick release 
tabs and pulling the main unit wire harness 
connector (B, Figure 61) from the instrument 
panel wire harness connector (B).

 9.  There are two (2) 1/2” bolts and washers (A & B, 

Figure 62) that secure the operator compartment 
(C) to the unit at the front pivots.  Loosen and 
remove both 1/2” bolts and washers.

 10. Loosen and remove the 3/8 X 2-1/2” bolt, 3/8 

washer and 3/8-16 nylock flange nut (A, Figure 
63) that secures the shock (B) to the bottom shock 
mount (C).

 11. The operator compartment can now be removed 

from the unit by raising the compartment up and 
pulling it backwards from the unit.

Regular Maintenance

Not 

for  

Reproduction