Chaparral Chaparral FS 1310 ユーザーズマニュアル

The router recognizes all SCSI devices connected to the three SCSI channels on the 
FS1310, and assigns each device a unique LUN address, which will be mapped as part of a 
unique FC address. You can configure the router to assign itself a LUN for in-band 
management, server-free backup, and other uses.

Connect the Fibre Channel cable to the router and the host computer, hub, or switch.

Power up connected servers, hubs, or switches on the network if necessary.

You are now ready to configure the router. To view the default settings, see 

. For information about changing the default settings, see 

LED status lights are on the rear panel of the router. For information about 
troubleshooting problems indicated by the status lights, see 

.

Figure 2-11. LED status lights

Table 2-12 describes the meaning of the LED status lights located on the rear of the router.

Table 2-12. LED status lights

FT

Router fault

Red

Solid on when router is powered-up 
and fails any internal diagnostic or 
detects a critical error

ST

Router status

Yellow

Solid on when router is powered-up 
and passes all internal diagnostics

Yellow

Off when router either:

!

Detects a warning/degraded mode

!

Fails to boot

FC

Host FC activity

Green

Solid on when FC link is connected
Solid off when FC link is 
disconnected