Toshiba sd-v395kc オーナーマニュアル

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound 

by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker 

system (right and left front speakers).

DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver.  

This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO 

OUT jack of the DVD/VCR.

Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR to the “COAXIAL” input of a Receiver or Processor.

Refer to the owner’s manual of the connected equipment as well.

When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the 

wall outlet before making any connections.

The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening 

level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier’s power on, the 

speakers may be damaged.

•

•

•

•

•

•

75 Ω coaxial cable (not supplied)

Use DVD video discs encoded 

via the MPEG2 recording 

system.

•

Amplifier equipped with an 

MPEG2 audio decoder

To COAXIAL 

type digital 

audio input

To COAXIAL DIGITAL 

AUDIO OUT

75 Ω coaxial cable (not supplied)

Amplifier equipped with a 

digital audio input

To COAXIAL 

type digital 

audio input

To COAXIAL DIGITAL 

AUDIO OUT

2K60121A.indb   21

2K60121A.indb   21

1/12/2007   3:50:09 PM

1/12/2007   3:50:09 PM