Toshiba sd-v395kc オーナーマニュアル
23
Basic setup (V
CR)
23
1
Press VCR MENU.
2
Press SET + or – to select “SYSTEM SETUP”, then
press ENTER.
3
Press SET + or – to select “AUTO CLOCK”.
4
Press ENTER to select “off”.
5
Press VCR MENU repeatedly to return to the normal
screen.
When the AUTO CLOCK is set to “OFF”, the
AUTO CLOCK adjustment does not function. You
must set the clock manually
24
.
•
Preparation:
Turn ON the TV and select to the corresponding
video input.
Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
•
•
1
Connect the Antenna or Cable system.
If you use a cable box, turn it on.
•
2
Plug the AC power cord to the AC outlet.
3
Make sure the DVD/VCR is turned off.
If you press POWER, the Auto Clock set is not
programmed.
•
4
Wait at least three minutes and press POWER.
5
Press CALL to check the clock setting on the on
screen display.
6
If the clock is not set, check the antenna condition.
The AUTO CLOCK may not function properly if the
reception condition is not good.
Clock setting
The AUTO CLOCK function will automatically set the built-
in clock (Month, Day, Year and Time) when the DVD/VCR is
connected to an Antenna or Cable system and it is turned off.
The DVD/VCR searches for a station in your area containing
the necessary AUTO CLOCK setting signals. Once received,
it will take approximately 4 minutes for the clock to set itself
automatically.
AUTO CLOCK setting
AUTO CLOCK adjustment
To set AUTO CLOCK to off
The AUTO CLOCK adjustment will be updated at
6:00 AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
•
•
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want AUTO CLOCK setting, it can be turned off:
To set STANDARD TIME
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may
recognize the wrong station for the AUTO CLOCK setting.
1
Press VCR MENU.
2
Press SET + or – to select “SYSTEM SETUP”, then
press ENTER.
3
Press SET + or – to select “STANDARD TIME”, then
press ENTER.
4
Press SET + or – to select your time zone, then press
ENTER.
ATLANTIC :
GMT–4hours
EASTERN :
GMT–5hours
CENTRAL :
GMT–6hours
MOUNTAIN : GMT–7hours
PACIFIC :
GMT–8hours
ALASKA :
GMT–9hours
HAWAII :
GMT–10hours
AUTO
: AUTO SET
(GMT: Greenwich Mean Time)
5
Press VCR MENU until the menu screen is cleared.
Notes:
To be able to select the standard time, the clock must first
be set by AUTO CLOCK once.
If you live in Newfoundland and the AUTO CLOCK does
not function properly, set the AUTO CLOCK menu option to
“OFF” and set the clock manually.
•
•
2K60121A.indb 23
2K60121A.indb 23
1/12/2007 3:50:10 PM
1/12/2007 3:50:10 PM