Netgear HR314 参照マニュアル

ページ / 123
Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
Advanced Configuration of the Router
8-7
 
LAN IP Setup
The second feature category under the Advanced heading is LAN IP Setup. This menu allows 
configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser 
interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown in 
Figure 8-3.
LAN IP Setup Menu
The router is shipped preconfigured to use private IP addresses on the LAN side, and to act.as a 
DHCP server. The router’s default LAN IP configuration is:
LAN IP addresses—192.168.0.1
Subnet mask—255.255.255.0
These addresses are part of the IETF-designated private address range for use in private networks, 
and should be suitable in most applications. If your network has a requirement to use a different IP 
addressing scheme, you can make those changes in this menu.
DHCP
By default, the router will function as a DHCP (Dynamic Host Configuration Protocol) server, 
allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to 
the router's LAN. The assigned default gateway address is the LAN address of the router. IP 
addresses will be assigned to the attached PCs from a pool of addresses specified in this menu. 
Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.