Mitsubishi pd-5030 ユーザーズマニュアル

19

Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of
the sky, etc.
Example: Adjusting the blue

1. On the MAIN MENU, select “VIDEO SETTINGS”,

then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.

2. Use the 

▲ and ▼ buttons to select “NEXT PAGE”.

3. Use the 

▲ and ▼ buttons to select “COLORVIEW”,

then press the MENU/ENTER button.
The “COLORVIEW” screen appears.

4. Use the 

▲ and ▼ buttons to select “BLUE”.

5. Adjust using the 

 and 

 buttons.

* If neither the 

 or 

 button is pressed within 5 seconds,

the current selection is stored into memory and the
previous screen reappears.

To continue making other adjustments...
Repeat from step 4.

 COLORVIEW settings
RED ................ Makes red’s adjustment
GREEN ........... Makes green’s adjustment
BLUE ............... Makes blue’s adjustment
YELLOW ......... Makes yellow’s adjustment
MAGENTA ...... Makes magenta’s adjustment
CYAN .............. Makes cyan’s adjustment
RESET ............ Resets settings to the factory default

value. Use 

 

 and 

 buttons to select

“ON”, then press the MENU/ENTER
button.

 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass

1. On the MAIN MENU, select “AUDIO SETTINGS”,

then press the MENU/ENTER button.
The “AUDIO SETTINGS” screen appears.

2. To adjust the bass ...

Use the 

▲ and ▼ buttons to select “BASS”.

3. Adjust the bass using the 

 and 

 buttons.

To continue adjusting the audio ...
Repeat from step 2.

Note : If “CAN NOT ADJUST” appears...
Set “AUDIO INPUT” on the AUDIO menu correctly.

 Audio settings menu
BASS .............. Controls the level of low frequency

sound.

TREBLE .......... Controls the level of high frequency

sound.

BALANCE ....... Controls the balance of the left and

right channels.

 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.