Marantz dv4001 ユーザーズマニュアル

Be sure to insert each 
plug fully for the best 
con nec tion. The plugs 
and jacks are color-cod ed 
to make con nec tion 
easier.

By connecting this DVD player to another 
Marantz audio component using a supplied 
system control cable, you can remotely 
operate the components as a single system.

•    When con nect ing to a com po nent with a 

remote sensor, be sure to connect the REMOTE 
CON TROL IN jack of this DVD player to 
the REMOTE CON TROL OUT jack of the 
com po nent with the remote sensor.

•    When connecting to component which is 

not equipped with a remote sensor, be sure 
to connect the com po nent to the REMOTE 
CONTROL OUT jack of this DVD player. 

This easy setup is the minimum set of 
connections you need to start watching 
DVD-Video discs. Both sound and picture 
are fed directly to your TV using the 
sup plied audio/video cables. For other 
possible con nec tions, see pages 11 and 12.

•    Before making or changing any rear panel 

connections, make sure that all components are 
switched off and unplugged from the wall outlet.

•    While a connected component is turned on, 

do not unplug the power cord of this DVD 
player from the wall outlet. The speaker may be 
damaged.

•    When connecting to a standard TV, select 

4:3 LETTER BOX or 4:3 PAN SCAN in the TV 
Aspect setting (see page 44).

•    Connect the video output of the player directly 

to your TV.  Because the player is de signed 
to support an Analog Protection System copy 
protection, there are cases when proper playback 
will not be possible if the player is connected to 
the TV through a VCR and images are recorded 
and played on the VCR.

•    The player’s video output and S1 output are not 

be progressive.

•      

     When using this DVD player independently, set 

this switch to INT. (INTERNAL). When using this 
DVD player in a system with a Marantz receiver 
equipped with a remote sensor, set the switch to 
EXT. (EXTERNAL). Change the switch setting 
using a pen with a sharp tip etc.

•      

     This is used when controlling components 

from different rooms with a keypad or other 
input device. Set the remote switch to EXT. 
(EX TER NAL) when using a fl asher input.

Connect to a 
composite video 
input on your TV 
using the supplied 
Audio/Video 
cable.

Plug into a 
standard AC wall 
outlet.

Connect to a pair of stereo 
audio inputs on your TV using 
the sup plied Audio/Video cable. 
You can connect a subwoofer to 
the SUBWOOFER Jack.

RS-232C terminal/
FLASHER IN
Control terminal 
for use by custom 
installers.

See Note:

Remote Switch