Marantz dv4001 ユーザーズマニュアル
Connecting Up
2
12
FLASHER
IN
VIDEO OUT
Y
OUT
IN
AC IN
RS-232C
S1
VIDEO
EXT.
INT.
COMPONENT
REMOTE CONTROL
MIXED 2CH
CENTER
COAX.
R
L
L
R
SUB W.
SURR.
FRONT
AUDIO OUT
OPT.
Ver1.1
HDMI
DIGITAL
R
C
B
C
1
2
4
3
COAX
Connecting analog audio cables
Be sure to fully insert each plug for the
best con nec tion. The plugs and jacks are
color-coded to make con nec tion easier.
best con nec tion. The plugs and jacks are
color-coded to make con nec tion easier.
Connecting coaxial cables
Use an interconnector with a pin-type
(also called RCA
or phono) plug on
each end to connect
up digital coaxial-
type jacks. Make
sure that the plug is
pushed fully home.
(also called RCA
or phono) plug on
each end to connect
up digital coaxial-
type jacks. Make
sure that the plug is
pushed fully home.
Connecting optical cables
Optical intercon-
nects only plug in
one way, so make
sure the plug is
correctly lined up
with the jack before
in sert ion. When
in sert ing the plug,
nects only plug in
one way, so make
sure the plug is
correctly lined up
with the jack before
in sert ion. When
in sert ing the plug,
Home theater audio connections
This player outputs multi-channel audio
in digital form. Check the manual for your
amplifi er/receiver to see what equipment it
is com pat i ble with (especially which digital
formats such as Dolby Digital, DTS, etc. It
can decode).
in digital form. Check the manual for your
amplifi er/receiver to see what equipment it
is com pat i ble with (especially which digital
formats such as Dolby Digital, DTS, etc. It
can decode).
Important
• Before making or changing any rear panel
connections, make sure that all com po nents are
switched off and unplugged from the wall outlet.
switched off and unplugged from the wall outlet.
• While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
player from the wall outlet. The speaker may be
damaged.
If your amplifi er has stereo inputs only,
connect them here. You can connect a
subwoofer to the SUBWOOFER Jack.
connect them here. You can connect a
subwoofer to the SUBWOOFER Jack.
Connect to the coaxial or
optical input of your amplifi er
if it has digital inputs.
optical input of your amplifi er
if it has digital inputs.
Plug into a standard
AC wall outlet.
AC wall outlet.
the pro tec tive shutter will open and you
should hear it click into po si tion when fully
in sert ed. Be careful that you do not force
the plug, because this could result in dam-
age to the protective shutter, the cable, or
the unit itself.
should hear it click into po si tion when fully
in sert ed. Be careful that you do not force
the plug, because this could result in dam-
age to the protective shutter, the cable, or
the unit itself.
Note
• If you listen to mul ti chan nel DVD-Audio through
one of the digital outputs, it will be downmixed
to stereo. Also, high sampling rate DVD-Audio
(192 kHz or 176.4 kHz) will be downsampled
to 96 kHz, 88.2 kHz, 48 kHz or 44.1 kHz,
depending on the disc. Multi channel and high
sampling rate DVD-Audio are only available
through the analog outputs.
to stereo. Also, high sampling rate DVD-Audio
(192 kHz or 176.4 kHz) will be downsampled
to 96 kHz, 88.2 kHz, 48 kHz or 44.1 kHz,
depending on the disc. Multi channel and high
sampling rate DVD-Audio are only available
through the analog outputs.
• All DVD-Audio and all Super Audio CD audio are
output only through the analog outputs. (see
page 39)
page 39)
OPT
If your amplifi er has 5.1 channel analog
inputs, connect them here. Connect
to the L (left)/R (right), SURR.L/.R
(SURROUND L/R), CENTER and SUB
WOOFER inputs of your amplifi er.
inputs, connect them here. Connect
to the L (left)/R (right), SURR.L/.R
(SURROUND L/R), CENTER and SUB
WOOFER inputs of your amplifi er.