Marantz dv4001 ユーザーズマニュアル

This player outputs video in a number 
of different ways. Choose the one most 
suit able for your system using the guide 
below.

S-Video should give a better picture, so if 
you have an S-Video input, use it. S-Video 
cables are available from any good audio/
visual dealer.

With an HDMI cable, both uncompressed 
video data and digital audio data (e.g., 
LPCM or bit stream data such as Dolby 
Digital, DTS, MPEG data or DVD Audio 
Multi channel) can be trans mit ted with just 
a single connector.

By transmitting DVD image data directly as 
digital data without it being fi rst converted 
into analog format, it becomes possible to 
provide the very fi nest in image quality (see 
pages 6, 40, 41, 46).

•    The HDMI output of this unit can be con nect ed 

to a DVI jack on a TV or other device using a 
conversion adapter. In this case, it is necessary 
to use a TV or display with an HDCP-com pat i ble 
DVI input. 

•    There may be no image output if con nect ed to 

a TV or display that is not com pat i ble with the 
above format.

•    Refer to the instruction manual of the TV or 

display to be connected to this unit for detailed 
information regarding the HDMI terminal.

•    When connecting a progressive input TV with the 

component output of the player, select ON in 
the Progressive setting (see page 44).

If your TV has a component video input, we 
rec om mend using it to connect directly to the 
COM PO NENT VIDEO OUT of this player. 
Use the standard 3-jack component video 
output.

If a component input 
is not available to you, 
connect this player to 
your TV or AV receiver 
using either the VIDEO 
or S1 jacks.

Plug into a standard 
AC wall outlet.

If your TV and projector have 
a HDMI terminal for Video and 
Audio Input, we recommend 
using it to connect directly to 
the HDMI out of this player. 

•    Before making or changing any rear panel 

connections, make sure that all components are 
switched off and unplugged from the wall outlet.

•    While a connected component is turned on, 

do not unplug the power cord of this DVD 
player from the wall outlet. The speaker may be 
dam aged.