Sharp MX-2300N ユーザーガイド
109
I-Fax Settings
I-Fax Default Settings
These settings are used to configure the default settings for Internet fax.
Touch the [Image Send Settings] key, the [I-Fax Settings] key, and the [I-Fax Default Settings] key, and configure the
settings.
Touch the [Image Send Settings] key, the [I-Fax Settings] key, and the [I-Fax Default Settings] key, and configure the
settings.
I-Fax Own Name and Address Set
This is used to configure the sender name and address
for Internet fax. The entered sender name and address
are printed at the top of each fax page you send.
for Internet fax. The entered sender name and address
are printed at the top of each fax page you send.
1
Touch the [Name] key and enter the
name.
name.
A maximum of 40 characters can be entered for the name.
After you have entered the name, touch the [OK] key.
After you have entered the name, touch the [OK] key.
2
Touch the [Own Address] key and enter
the sender address.
the sender address.
A maximum of 56 characters can be entered. After you
have entered the address/domain, touch the [OK] key.
have entered the address/domain, touch the [OK] key.
3
Touch the [OK] key.
Auto Wake Up Print
When the [POWER] key (
) is "off" (but the main
power switch is "on") and an Internet fax is received, this
function activates the machine and prints the fax.
To enable this setting, select the checkbox
function activates the machine and prints the fax.
To enable this setting, select the checkbox
and
touch the [OK] key.
When this function is disabled, received Internet faxes
are not printed until the [POWER] key (
When this function is disabled, received Internet faxes
are not printed until the [POWER] key (
) is switched
"on".
I-Fax Speaker Volume Settings
This is used to adjust the volume of fax receive signals
and communication error signals heard through the
speaker.
A fax receive signal sounds after the machine checks
the mail server and retrieves received faxes. A
communication error signal sounds when a delivery
failed e-mail is received from the destination Internet fax
machine.
and communication error signals heard through the
speaker.
A fax receive signal sounds after the machine checks
the mail server and retrieves received faxes. A
communication error signal sounds when a delivery
failed e-mail is received from the destination Internet fax
machine.
Select one of the keys and touch the [OK] key.
Original Print on Transaction
Report
Report
When a transaction report is printed, this is used to print
part of the first page of the transmitted original on the
transaction report. Select one of the settings below.
part of the first page of the transmitted original on the
transaction report. Select one of the settings below.
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
• Print Out Error Report Only
• No Printed Report
Select one of the keys and touch the [OK] key.
This setting will not be effective if the following
"
This setting will not be effective if the following
"
set to "No Printed Report".
These settings can be configured when the Internet fax expansion kit is installed.
For the procedure for entering text, see "6.
ENTERING TEXT" in the User's Guide.
ENTERING TEXT" in the User's Guide.
System Settings
I-Fax Own Name and Address Set
Name
AAA AAA
aaa@aaa.aa.com
Own Address
OK
System Settings
I-Fax Speaker Volume Settings
OK
Receive Signal
Communication
Error Signal
Volume:
Small
Small
Volume:
Middle
Middle
Volume:
Big
Big
No Sound