Sharp MX-2300N ユーザーガイド

You can turn off automatic printing of received faxes (Hold Setting for Received Data Print). When this function is 
enabled, received faxes will not be printed automatically; a password entry screen will appear instead.

To print a received fax, enter the password that is programmed for this function (4 digits) with the numeric keys.
To close the password entry screen without entering a password, touch the [Cancel] key. The password entry screen will 
appear again if the mode is changed.
In addition, after the [Cancel] key is touched to close the screen, the 

 key will blink in the base screen as a reminder 

that a received fax is being held.
Touch the blinking 

 key to enter the password and print the fax.

"Hold Setting for Received Data Print" can be enabled for received faxes and also for transaction reports that are printed with 
the received faxes.

This is used to program a password for printing of received faxes.

Received data is stored.
Enter password via the 10-key.

Cancel