Aethra d2061 ユーザーズマニュアル
ADSL TESTER D2061
USER’S MANUAL
The results page displays the following items:
►
Date, time and elapsed time
►
Transmitted cells and Received cells
►
Average rate obtained in reception and transmission expressed in cells per
second transmitted and received
second transmitted and received
►
Ratio between average rate reached and average rate set expressed in
percentage
percentage
►
Average rate obtained in reception and transmission expressed in Kbit per
second
second
►
Number of lost cells
►
CLR, (Cell Loss Ratio) ratio between lost and received cells, index of the line
quality at ATM level. This result could change during the test because of the
excessive delay of the cells.
quality at ATM level. This result could change during the test because of the
excessive delay of the cells.
3.7. IP Ping
With this test is possible to verify the correct operation of the Internet connection and
check if a remote network or host is reachable, by sending a protocol ICMP (Internet
Control Message Protocol). The response from the remote will provide information
about the net structure.
check if a remote network or host is reachable, by sending a protocol ICMP (Internet
Control Message Protocol). The response from the remote will provide information
about the net structure.
3.7.1. Setting up a IP Ping test
Define the following parameters to perform the test:
Dest.IP/Dest. URL: Insert the IP or URL destination address to ping.
Dest.IP/Dest. URL: Insert the IP or URL destination address to ping.
1
Press the key ASTERISK to switch from the field “Dest.
IP” to “Dest. URL” and viceversa.
IP” to “Dest. URL” and viceversa.
42
CHAPTER 3 - PERFORMING A MANUAL TEST