DataCard SD260 ユーザーガイド

131

 

Card Appearance

Card appearance problems can be caused by many different factors. Click the link 
below that best describes the card appearance issue seen on the printed card.

Something did not print

Nothing is printed on 

the card. 
 
 

The magnetic stripe Encode Only option is set to On. 

Open Preferences and change Encode Only to Off.

The Print Ribbon is loaded incorrectly. Remove the 

print ribbon and install it correctly.

The page size was not set to ISO-ID1. In the 

application, use Print set up to choose the card 

printer. The correct page size will be available after 

choosing the printer. See 

 for details.

Color printing on top of 

a black background 

does not appear on 

the card.

The printer uses the print ribbon panels in sequence; 

the Y panel prints first, then M, and so on. The black 

panel of the print ribbon is used last and will print over 

the color panels. For best results, change the 100% 

black background to a color near black, so that it 

prints using the YMC (color) panels of the print ribbon.