DataCard SD260 用户指南
131
Card Appearance
Card appearance problems can be caused by many different factors. Click the link
below that best describes the card appearance issue seen on the printed card.
below that best describes the card appearance issue seen on the printed card.
•
•
•
•
•
•
Something did not print
Problem
Solution
Nothing is printed on
the card.
The magnetic stripe Encode Only option is set to On.
Open Preferences and change Encode Only to Off.
The Print Ribbon is loaded incorrectly. Remove the
print ribbon and install it correctly.
The page size was not set to ISO-ID1. In the
application, use Print set up to choose the card
printer. The correct page size will be available after
choosing the printer. See
for details.
Color printing on top of
a black background
does not appear on
the card.
The printer uses the print ribbon panels in sequence;
the Y panel prints first, then M, and so on. The black
panel of the print ribbon is used last and will print over
the color panels. For best results, change the 100%
black background to a color near black, so that it
prints using the YMC (color) panels of the print ribbon.