Frigidaire frt22irshk5 ユーザーガイド
10
Door Reversal
Instructions
Instructions
(continued)
G05I0118
7. Reverse handles while doors are off. Remove the two screws
attaching the handle to the bottom of the freezer door. Remove
short trim piece by sliding the trim straight up and off of handle
bracket. Remove the screw attaching the top of the handle to door,
and reinstall on other side, using the hole found behind the self-
adhesive nameplate. To move nameplate to the other side, peel
off the nameplate and reapply over the old handle holes. Reattach
handle to bottom of door. Slide the trim piece straight down onto
handle bracket.
attaching the handle to the bottom of the freezer door. Remove
short trim piece by sliding the trim straight up and off of handle
bracket. Remove the screw attaching the top of the handle to door,
and reinstall on other side, using the hole found behind the self-
adhesive nameplate. To move nameplate to the other side, peel
off the nameplate and reapply over the old handle holes. Reattach
handle to bottom of door. Slide the trim piece straight down onto
handle bracket.
Freezer Door
G05I0111
Refrigerator Door
8. Trim Removal (Full-Length Trim models only)
In some models, the refrigerator door has a full length trim
piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim attaches to the handle
bracket. An adhesive "trim lock" is positioned about half-
way down. The bottom of the trim is held in place by either
an adhesive trim lock, or a trim lock with two prongs inserted
into a hole on the face of the door. Remove the trim by gently
pulling the trim lock areas out and away from the door. When
the trim is free from the door, slide the trim straight down and
away from the handle bracket.
In some models, the refrigerator door has a full length trim
piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim attaches to the handle
bracket. An adhesive "trim lock" is positioned about half-
way down. The bottom of the trim is held in place by either
an adhesive trim lock, or a trim lock with two prongs inserted
into a hole on the face of the door. Remove the trim by gently
pulling the trim lock areas out and away from the door. When
the trim is free from the door, slide the trim straight down and
away from the handle bracket.
For models with short handle trim, remove by sliding the
trim straight down and off of handle bracket.
trim straight down and off of handle bracket.
To remove handles: Remove the three screws attaching the
handle to the refrigerator door. Carefully remove hole plugs
from corresponding holes on opposite side of doors and
reattach handle.
handle to the refrigerator door. Carefully remove hole plugs
from corresponding holes on opposite side of doors and
reattach handle.
To reattach trim: Slide both trim locks out of trim. Insert the
new adhesive trim locks contained in your literature pack.
NOTE: Trim lock must be removed and installed by sliding
OVER the two donut shaped areas. Install trim to handle by
sliding up over bottom of handle. Carefully align trim and
press down at trim lock locations. Replace hole plug on
opposite side. Use rubbing alcohol to remove any adhesive
residue from old trim lock location(s).
new adhesive trim locks contained in your literature pack.
NOTE: Trim lock must be removed and installed by sliding
OVER the two donut shaped areas. Install trim to handle by
sliding up over bottom of handle. Carefully align trim and
press down at trim lock locations. Replace hole plug on
opposite side. Use rubbing alcohol to remove any adhesive
residue from old trim lock location(s).
For models with short handle trim, slide the trim straight up
onto handle bracket.
onto handle bracket.