Frigidaire frt22irshk5 ユーザーガイド
9
G05I0006
G05I0098
G05I0013
G05I0003
Your refrigerator is equipped with convertible door hinges. Hinging of the door can
be changed to the opposite side any time you wish. An envelope containing extra
plastic hole plugs is included in some models. Turn the refrigerator control to OFF.
Remove all food, bottles, and other items from the door. Begin with freezer door.
Completely remove one door before beginning the other.
be changed to the opposite side any time you wish. An envelope containing extra
plastic hole plugs is included in some models. Turn the refrigerator control to OFF.
Remove all food, bottles, and other items from the door. Begin with freezer door.
Completely remove one door before beginning the other.
3. With the refrigerator door closed, remove
center hinge pin. (Note the arrangement of
the upper and lower washers on the hinge
pin. The washers must be assembled later in
the same manner.) Open refrigerator door
enough to allow door to be lifted off the
lower hinge. Remove the two screws
attaching the center hinge. The third
outermost screw under the center hinge
should be left in place. Save hinge, pin, and
washers for reassembly later. Reinstall
screws in original holes.
center hinge pin. (Note the arrangement of
the upper and lower washers on the hinge
pin. The washers must be assembled later in
the same manner.) Open refrigerator door
enough to allow door to be lifted off the
lower hinge. Remove the two screws
attaching the center hinge. The third
outermost screw under the center hinge
should be left in place. Save hinge, pin, and
washers for reassembly later. Reinstall
screws in original holes.
Door Reversal
Instructions
Instructions
Hinge Pin
Washer
Screws
Hinge
Washer
Hinge Pin
G05I0008
G05I0007
4. Remove hole plugs from the non-hinge
side of the following:
side of the following:
• the top of the cabinet
• the top of the freezer door
• the third, outermost screw hole in center mullion
• the top of the freezer door
• the third, outermost screw hole in center mullion
Reinstall on opposite side. If damaged from
removal, use new plugs included in literature
pack (some models).
removal, use new plugs included in literature
pack (some models).
Washer
Hinge
Bolt
Washer
Hinge
Bolt
5. Remove the toe grille from front of
refrigerator by pulling straight forward.
Remove the two hex head bolts attaching
the lower hinge. Save the hinge and
washer(s) for reassembly.
refrigerator by pulling straight forward.
Remove the two hex head bolts attaching
the lower hinge. Save the hinge and
washer(s) for reassembly.
6. Bolt lower hinge to cabinet on opposite
side. Install washer(s) on the lower hinge
pin.
side. Install washer(s) on the lower hinge
pin.
(Third, outer-most
screw is left in place.)
Hole Plug
Hole Plugs
1. Snap off hinge cover at top of cabinet.
With the freezer door closed, remove the
three screws attaching upper hinge to
cabinet. Note: Hinge has a minimal spring
load. Hold bracket when removing last
screw. Lift the hinge up and off. Be sure to
save screws and hinge for reassembly
later.
With the freezer door closed, remove the
three screws attaching upper hinge to
cabinet. Note: Hinge has a minimal spring
load. Hold bracket when removing last
screw. Lift the hinge up and off. Be sure to
save screws and hinge for reassembly
later.
2. Open the freezer door enough to allow
it to be lifted off the center hinge. Hinge pin
may stick in spin bearing. Use pliers to
remove hinge pin.
it to be lifted off the center hinge. Hinge pin
may stick in spin bearing. Use pliers to
remove hinge pin.