TallyGenicom 3860 クイック設定ガイド

GEK-01054

28

The printer is shipped with the paper tension set to the minimum setting.
This works for most continuous forms. The paper tension may need to be
adjusted for:

•

 

Multipart forms

•

 

Heavy paper or card stock

•

 

The manual paper path

Adjusting paper tension changes the tension between the main friction
roller and the nip or exit roller assembly. This adjustment affects the rear
and manual paper paths, but not the front path.

Low paper tension will cause inconsistent line feeds. High paper tension
will eventually cause the sprocket feed holes to tear out of the paper.
Paper tension and print head gap settings may interact. Try different
settings to find the combination that works best.

The chart shows starting points for the paper tension adjustment.

Toward the front of the
printer

Use as needed.

Middle position

Continuous feed: 15-24lb.
Manual feed: light weight cut
sheets.

Toward the rear of the
printer

Manual feed: envelopes,
heavy cut sheets.

to disengage the lever pin from the hole in the side frame.

Make sure the lever pin is in one of the four holes that serve as detents.