ICOM IC-V8000 取り扱いマニュアル

34

5

MEMORY OPERATION

■ Transferring bank contents

Contents of programmed memory banks can be cleared or
transferred to another bank.

INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.

q Select the desired bank contents to be transferred or erased.

➥ Push [M/CALL(PRIO)] to select memory mode.

➥ Push [BANK(OPT)] then rotate the tuning dial to select

the desired memory bank.

• Bank initial blinks.

➥ Push [BANK(OPT)] to select the bank then rotate the

tuning dial to select the desired contents.

• Bank initial stops blinking.

w Push [MW(S.MW)] momentarily. 

• “M” and bank initial blink.

e Rotate the tuning dial to select the desired bank initial to

transfer or erase.

• Select “– –” indication when erasing the contents from the bank.

r Push [MW(S.MW)] again. 

• “M” and bank initial or “– –” indication stops blinking.

t Push [BANK(OPT)] twice to return to regular memory con-

dition.

y Repeat steps q to t for transferring or erasing an an-

other banks contents.

z Select the desired bank contents.

➥ Push [MR/CALL] to select memory

mode.

➥ Push [BANK/OPTION] then select the

desired memory bank via [Y]/[Z].

➥ Push [BANK/OPTION] to select the

bank then select the desired contents
via [Y]/[Z].

x Push [FUNC] then [

CLR

A(MW)].

• “M” and bank initial blinks.

c Push [Y]/[Z] to select the desired bank ini-

tial to transfer or erase.

• Select “– –” indication when erasing the con-

tents from the bank.

v Push [

CLR

A(MW)].

• “M” and bank initial or “– –” indication stops

blinking.

b Push [BANK/OPTION] twice to return to

regular memory condition.

n Repeat steps z to b for transferring or

erasing an another banks contents.

BANK/OPTION

MW

[Y]/[Z]