ICOM IC-V8000 取り扱いマニュアル

35

6

■ Call channel selection

➥ Push [M/CALL(PRIO)] sev-

eral times to select the call
channel.

• “C” appears instead of mem-

ory channel number indication.

• Push [M/CALL(PRIO)] once or

twice to select memory mode,
or push [V/MHz(SCAN)] to se-
lect VFO mode.

➥ Push [MR/CALL] for 1 sec. to select the call

channel.

• Push [

MR/CALL

] to select memory mode, or push

[VFO/LOCK] to select VFO mode.

■ Call channel transferring

q Push [M/CALL(PRIO)] several times to select the call

channel.

• “C” appears.

w Push [MW(S.MW)] momentarily, then rotate the tuning dial

to select the memory channel to transfer the contents to.

• “M” indicator and memory channel number blink.
• To transfer to the VFO, push [MW(S.MW)] for 1 sec. 

e Push [MW(S.MW)] for 1 sec. to transfer when a momen-

tary push was used in the previous step.

• If channel names have been programmed into the call channel,

the names are also transferred.

z Push [MR/CALL] for 1 sec. to select the call

channel.

x Push [FUNC], [

CLR

A(MW)] momentarily, then

push [Y]/[Z] to select the memory channel to
transfer the contents to.

• To transfer to the VFO, push [FUNC], then push

[

CLR

A(MW)] for 1 sec. 

c Push [FUNC], then [

CLR

A(MW)] for 1 sec. to

transfer when a momentary push was used in
the previous step.

• If channel names have been programmed into the

call channel, the names are also transferred.

MR/CALL

MW

[Y]/[Z]

MR/CALL

Push [M/CALL(PRIO)] several 
times to select the call channel.

Appears

✔INFORMATION

When the VFO mode is se-

lected from the call channel,
a small “c” appears instead
of memory channel number. 

Small “c” shows VFO was 

selected from the call channel.