ICOM IC-V8000 取り扱いマニュアル

CALL CHANNEL OPERATION

■ Programming a call channel

Operating frequency, duplex information, subaudible tone in-
formation (tone encoder or tone squelch ON/OFF and its fre-
quency) and alphanumeric channel names can also be
programmed into the call channel.

q Set the desired frequency in VFO mode.

➥ Push [V/MHz(SCAN)] to select VFO mode.

➥ Set the frequency using the tuning dial.

➥ Set other data as desired.

w Push [MW(S.MW)] momentarily.
e Rotate the tuning dial to select the call channel

• “M” indicator and “C” blink.

r Push [MW(S.MW)] for 1 sec. to program.

• 3 beeps sound and the unit returns to VFO mode automatically.

z Set the desired frequency in VFO mode.

➥ Push [VFO/LOCK] to select VFO mode.

➥ Set the frequency.

➥ Set other data as desired.

x Push [FUNC], then [

CLR

A(MW)] momentarily.

c Select the call channel via [Y] or [Z] .
v Push [FUNC] then [

CLR

A(MW)] for 1 sec. to

program.

• 3 beeps sound and the unit returns to VFO mode

automatically.

MR/CALL

[Y]/[Z]

[EXAMPLE]: Programming 145.120 MHz into the call channel via the microphone.

Set the frequency.

Push to select VFO mode.

Push , then .

Push , then push for 1 sec.

➠

Push until large “C” appears.

Beep

“