Canon imageFORMULA DR-G1130 マニュアル

3-22

If an error occurs during scanning, document feeding will be interrupted. This section describes how to handle such occurrences.

When document feeding is interrupted, an error message will 
appear on the display panel.

■ When a paper jam is detected

■ When a skewed document is detected

■ When a staple is detected

■ When a double feed is detected (Rapid 

■ When a double feed is detected (Rapid 

Refer to the following based on the error.
When a paper jam, slanted document, or staple is detected, 

When a double feed is detected, 

When paper jam, paper skew or a staple is detected, remove 
any documents that remain in the eject tray or inside the 
scanner.

• Remove documents that remain inside the scanner carefully. 

Your documents could be damaged or you could be injured by 
paper cuts. 

• Remove documents that remain inside the scanner completely. 

Paper shreds remaining inside the scanner may cause future 
jams or damage.

Remove any documents that remain in the eject tray.

Open the upper unit gently.

Be careful to avoid pinching your hands when opening and 
closing the upper unit.

Remove any documents that remain inside the 
scanner.

• If the document has stopped in the midst of ejecting to the 

eject tray, raise the upper unit only slightly and remove it.

• If the document remains completely inside the scanner, open 

the upper unit as far as it goes up to remove it.