Canon imageFORMULA DR-G1130 マニュアル

6-3

When one of the following messages appears on the display 
panel, an error has occurred in the scanner. Follow the 
indicated procedure to resolve the error. 

■ Check Imprinter

Error Code: H001
Problem: No ink cartridge is installed in the imprinter.
Solution: Install an ink cartridge.

■ Cover Open

Error Code: C001
Problem: The scanner’s upper unit is open.
Solution: Close the upper unit. 

Error Code: C009
Problem: The imprinter cover is open.
Solution: Close the imprinter cover. 

Error Code: C010
Problem: The pickup roller cover is open.
Solution: Close the pickup roller cover. 

■ Jam

Error Code: Pxxx
Problem: Paper has jammed.
Solution: Open the upper unit and remove the jammed 
paper. 

The displayed error code indicates the location of the paper jam.
• P001, P002: The document is jammed near the feed inlet.
• P004: The document is jammed inside the scanner.
• P006, P007: The document is jammed near the eject outlet.
*

P001, P006 can be considered to be due to the document feed 
speed being too fast or the leading edge of the document not 
feeding correctly.

■ Call for Service

Error Code: Exxx
Problem: Internal scanner error.
Solution: Turn the power OFF, and restart the scanner. If 
this does not solve the problem, make a note of the error 
code, and contact your Canon service representative.

■ Skew Detected

Error Code: J018
Problem: A skewed document page contacted the wall of 
the transport path.
Solution: Remove and reposition the document page.