Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド
Routing
323
M6100 Web Management User Guide
3.
Select the unit/slot/port for the new virtual router from the Interface list.
4.
Enter the Primary IP Address of the Virtual Router.
5.
From the Mode list, select Active or Inactive mode for the new virtual router.
6.
Click Add to add a new virtual router to the switch configuration.
7.
Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
8.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
9.
Click Delete to delete the selected virtual router.
Note:
The router cannot be deleted if there are secondary addresses
configured.
configured.
Table 122. VRRP Global Configuration
Field
Description
Interface IP Address
Indicates the IP Address associated with the selected interface.
State
The current state of the Virtual Router. Possible values are:
•
Initialize
•
Master
•
Backup
Advanced VRRP Configuration
.From the Routing > VRRP > Advanced link, you can access the following pages:
•
•
•
•