Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH ユーザーズマニュアル
576
|
Chapter 18. STP
NETGEAR 8800 User Manual
By default, the port encapsulation mode for user-defined STPDs is
emistp
. In this example,
you set it to
dot1d
.
EMISTP Configuration Example
is an example of EMISTP.
Figure 56. EMISTP Configuration Example
Note:
By default, all ports added to a user-defined STPD are in
emistp
mode, unless otherwise specified.
The following commands configure the switch located between S1 and S2:
create vlan red
configure red tag 100
configure red add ports 1:1-1:4 tagged
create vlan green
configure green tag 200
configure green add ports 1:1-1:2 tagged
create vlan yellow
configure yellow tag 300
configure yellow add ports 1:3-1:4 tagged
create stpd s1
configure stpd s1 add green ports all
configure stpd s1 tag 200
configure stpd s1 add red ports 1:1-1:2 emistp
enable stpd s1
EX_051
S1
S3
VLAN yellow
VLAN red
VLAN red
VLAN brown
S2
S4
VLAN red
VLAN green
VLAN red
VLAN blue