Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH ユーザーズマニュアル
Chapter 18. STP
|
577
NETGEAR 8800 User Manual
create stpd s2
configure stpd s2 add yellow ports all
configure stpd s2 tag 300
configure stpd s2 add red ports 1:3-1:4 emistp
enable stpd s2
RSTP 802.1w Configuration Example
is an example of a network with multiple STPDs that can benefit from RSTP. For
RSTP to work:
•
Create an STPD.
•
Configure the mode of operation for the STPD.
•
Create the VLANs and assign the VLAN ID and the VLAN ports.
•
Assign the carrier VLAN.
•
Add the protected VLANs to the STPD.
•
Configure the port link types.
•
Enable STP.
Figure 57. RSTP Example
In this example, the commands configure switch A in STPD1 for rapid reconvergence. Use
the same commands to configure each switch and STPD in the network.
the same commands to configure each switch and STPD in the network.
Sales, Personnel, Marketing
STPD 1
STPD 2
Manufacturing, Engineering, Marketing
Sales, Personnel, Manufacturing, Engineering, Marketing
Switch Y
Switch Z
Switch M
Switch B
EX_048
Switch A