Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH ユーザーズマニュアル
Appendix C. Troubleshooting
|
847
NETGEAR 8800 User Manual
Tarball Name: TechPubsLab_C_09271428.tgz
./primary.cfg
You can also use this command in conjunction with the
show tech
command. Prior to
uploading debug information files, the switch prompts you with the following message to run
the
the
show tech
command with the
logto
file option:
Do you want to run show tech logto file first? (y/n)
Enter
y
to run the
show tech
command before uploading debug information. If you enter
y
, the
show_tech.log.tgz
file is included during the upload. Enter
n
to upload debug information
without running the
show tech
command.
After you upload the debug information, you should see a compressed TAR file on the TFTP
server, which contains the debug information.
server, which contains the debug information.
The TAR file naming convention is
<SysName>_<{<slot#>|A|B}I|C>_<Current Time>.tgz
- Current Time = mmddhhmm ( month(01-12), date(01-31), hour(0-24),
minute(00-59) ).
Managing Debug Files
Using a series of commands, you can manage the files stored on the internal or external
memory card. For the purposes of this section, it is assumed that you have configured the
switch to send core dump information under the guidance of NETGEAR Technical Support.
memory card. For the purposes of this section, it is assumed that you have configured the
switch to send core dump information under the guidance of NETGEAR Technical Support.
Managing the debug files might include any of the following tasks: renaming or copying a
core dump file, displaying a comprehensive list of files including core dump files, transferring
core dump files, and deleting a core dump file.
core dump file, displaying a comprehensive list of files including core dump files, transferring
core dump files, and deleting a core dump file.
The following sections provide a brief overview of the available commands and describe the
following topics:
following topics:
For information about managing the configuration or policy files stored on your system, see
.
Note:
Filenames are case-sensitive. For information on filename
restrictions, see the specific command in the NETGEAR 8800
Chassis Switch CLI Manual.
Chassis Switch CLI Manual.