Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch ハードウェアマニュアル

Step 2: Install the Switch

The NETGEAR Smart Switch can be installed on a flat surface or in a standard 19-inch rack.

Install the Switch on a Flat Surface

The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each of 
the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch 
against shock/vibrations. 

Install the Switch in a Rack

To install the switch in a rack, use the following procedure (and see 

page 19). To perform this procedure, the 17-inch rack-mount kit supplied with switch is 
required.

Attach the supplied mounting brackets to the side of the switch. 

Insert the screws provided in the rack-mount kit through each bracket and into the bracket 
mounting holes in the switch. 

Tighten the screws with a #1 Phillips screwdriver to secure each bracket. 

Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head 
screws with nylon washers through each bracket and into the rack. 

Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack.