Netgear WNDA3100v2 – N600 Wireless Dual Band USB Adapter ユーザーズマニュアル

2-2

During the WNDA3100v2 software installation, the Smart Wizard lists the available networks. 
After installation you can use the Join a Network button on the Network tab at any time to view the 
available networks and select the one that you want to use. 

Network Name (SSID)

The name assigned to a wireless network. This is the same as the SSID or 
ESSID configuration parameter. Note that as a security measure, some wireless 
access points do not broadcast their SSID. In such cases, the SSID field is blank 
even though the rest of the information is still displayed.

Channel

The channel determines which operating frequency is used.

N

The access point supports wireless N mode.

WPS

The access point supports WPS.

Security

Identifies whether the wireless network uses security settings such as 
WPA2-PSK, WPA-PSK, or WEP.

Signal

The signal strength of the communications.

MAC Address

The hardware address (MAC address) of the wireless device broadcasting this 
information.

Mode

The type of wireless network — Access. Point (Infrastructure) or Computer-to-
Computer (Ad Hoc)

Help button

Display online help.

Join a Network button

View networks and join a network. See the following section 

Connect button

Connect to the network that you selected

Scan button

Check for wireless networks. Clicking Scan refreshes the screen.

Close button

Close the window.

Note: Make sure that you know the wireless security settings for the network that you 

want to use. For example, if a network uses WEP, you must know the WEP key in 
order to connect to it. If you use secure networks frequently, set up profiles for each 
network with the wireless network and security settings.