Netgear WNDA3100v2 – N600 Wireless Dual Band USB Adapter ユーザーズマニュアル
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
2-3
v1.0, June 2009
To join a network:
1. Use the
icon to open the Smart Wizard. On the status bar, click Join a Network.
2. If the Smart Wizard detects an access point or router with WPS, it displays the WPS screen
). WPS is described in
. To connect without using WPS, select No, and click Next.
3. Select a network from the drop-down list. If you select a hidden network, then you must enter
the SSID. Click Next.
4. Follow the steps of the wizard to specify the wireless security if used, and to create a profile.
5. Review your settings, and click Finish.
6. You can use the status bar to verify your network connection. For more information, see
. Click Close to exit the Smart Wizard.
Using Push 'N' Connect (WPS) to Connect to a Wireless
Network
Network
This feature is based on the Wi-Fi Protected Setup (WPS) standard (for more information, see
). WPS automatically configures the network name (SSID) and wireless
security for the access point or router and the wireless-N USB adapter. Note that WPS is not a new
security feature—it makes existing security features easier to configure.
security feature—it makes existing security features easier to configure.
To use WPS with your wireless-N USB adapter you need:
•
An access point or router that supports WPS. It will have a WPS symbol.
Figure 2-2
Hidden network