KitchenAid 36" Convertible Island-Mount 400-CFM Glass Canopy Hood インストールガイド

Install Duct Covers

NOTE: Remove the film from the duct covers.
1.  Assemble the upper duct covers together and install 

the duct covers around the support frame. The larger 

hole in the flanges of the upper duct cover must be 

outside the smaller hole in the mating flange of the 

other upper duct cover.

2.  Secure the upper duct covers together with two 

3.5 x 6.5 mm screws at the top and two 2.9 x 3 mm 

screws at the bottom. Install 1 screw on each side 

at the top and bottom of the assembled duct covers.

NOTE: For non-vented (recirculating) installation, the slotted 

holes in the upper duct covers will be visible when assembled. 

For vented installations, the slotted holes will be hidden down 

inside the lower duct covers.

3.  Slide the upper duct covers up the frame to the 

ceiling and secure to the upper horizontal support 

with 2 - 3.5 x 6.5 mm screws.

4.  Place the long end of the plastic clips (2) into the bottom 

of the front lower duct cover.

5.  Install the lower duct cover (front) to the range hood canopy. 

Spread the lower duct cover opening slightly and position it 

over the upper duct cover. Set the lower duct cover in place. 

Position so the flanges of the lower duct cover set into the 

flanges of the upper duct covers.