KitchenAid 36" Convertible Island-Mount 400-CFM Glass Canopy Hood インストールガイド

6.  Install the lower duct cover (rear) to the range hood canopy. 

Spread the lower duct cover opening slightly and position it 

over the upper duct cover. Set the lower duct cover in place. 

Position so the flanges of the lower duct cover set into the 

flanges of the upper duct cover. Make sure the front and 

rear lower duct covers mate properly.

NOTE: When assembling the rear lower duct cover to the front 

lower duct cover, the flange (both sides) must be placed over 

the plastic clip to secure the lower duct covers together at 

the bottom.

7.  Secure the lower duct covers together at the top using 

2 plastic clips. Use one plastic clip on each side.

8.  Secure the lower duct cover to the range hood canopy 

using 4 - 4.2 x 8 mm screws.

Complete Installation

1.  For non-vented (recirculating) installations only, install 

charcoal filters over metal grease filter. See the “Range 

Hood Care” section.

2.  Install metal filters. See the “Range Hood Care” section.
3.  Check the operation of the range hood blower and light. 

See the “Range Hood Use” section.
If range hood does not operate, check to see whether a 

circuit breaker has tripped or a household fuse has blown. 

NOTE: To get the most efficient use from your new range hood, 

read the “Range Hood Use” section.