Bosch TES 50129 RW ユーザーズマニュアル

Robert Bosch Hausgeräte GmbH

LED 

h

 lights up.

 

● Place a container with a capacity of at 

least 0.5 litres under the milk frother 

 outlet (6).

 

● Pull out the milk frother (6)

 to open it.

The service programme will now run for 

 approximately 12 minutes.

LED 

D

 lights up.

 

● Rinse the water tank (16) and refill it with 

fresh water up to the 

max mark.

 

● Press the start button (10).

The service programme will now run for 

approximately 30 seconds and rinse the 

appliance.

LED 

h

 lights up.

 

● Push the milk frother (6) in to close it.

The service programme will now run for 

 approximately 8 minutes.

LED 

H

 lights up.

 

● Empty the drip tray (8) and reinsert it.

If you are using a filter, reinsert it now. 

The appliance has been cleaned, descaled 

and is ready for use again.

¡

¡

Information: The appliance must be ready 

for use and the water tank

 (16) filled. 

1.  Place a large container under the milk 

frother outlet (6).

2.  Press the steam button (11). 

LED 

h

 flashes and the appliance now 

heats up for approximately 20 seconds. 

3.  If LED 

h

 lights up, open the milk frother 

(6) by pulling it out and release steam 

for about 15 seconds.

4.  Press the power on/off switch 

O / I (9) to 

switch off the appliance.

5.  Empty the water tank (16) and the drip 

tray (8).

The following accessories are available 

from retailers or from customer service:

Order number Retailer

Customer 

service

Cleaning 

tablets

TCZ6001

310575

Descaling 

tablets

TCZ6002

310967

Water filter

TCZ7003

467873

Grease (tube)

–

311368 

TES501_Heft1_RW.indb   18

14.09.2011   16:10:31