Bosch TES 50129 RW ユーザーズマニュアル

ページ / 117
Robert Bosch Hausgeräte GmbH
20
en
Problem
Cause
Remedy
Grinding unit does not grind 
the beans.
Beans are not falling into 
the grinding unit (beans too 
oily).
Gently tap the bean con-
tainer (1). Change the type 
of coffee if necessary.  
When the bean container 
(1) is empty, wipe it with a 
dry cloth.
No hot water dispensed.
The milk frother (6) is soiled. Clean the milk frother (6)
,  
see “Maintenance and daily 
cleaning”.
Too little or no milk froth.
The milk frother (6)
 is soiled. Clean the milk frother (6),  
see “Maintenance and daily 
cleaning”.
Build-up of limescale in the 
appliance.
Descale the appliance.
Milk unsuitable for frothing.
Use milk with a fat content 
of at least 1.5%.
The milk frother (6) is not 
assembled correctly.
Wet the milk frother parts
 
and press together firmly.
Coffee dispensing slows to 
a trickle or stops completely.
The grind setting is too fine 
or the pre-ground coffee is 
too fine.
Adjust the grinding unit to 
a coarser setting or use 
 coarser pre-ground coffee.
Build-up of limescale in the 
appliance.
Descale the appliance.
Coffee has no “crema”.
Unsuitable type of coffee.
Use a type of coffee with a 
higher proportion of robusta 
beans.
The beans are no longer 
fresh.
Use fresh beans.
The grind setting is not suit-
able for the beans.
Adjust the grind setting to 
fine.
Coffee is too “acidic”.
The grind setting is too 
coarse or the pre-ground 
coffee is too coarse.
Adjust the grinding unit to a 
finer setting or use finer pre-
ground coffee.
Unsuitable type of coffee.
Use a darker roast.
If you are unable to solve the problem, please call the hotline.
Simple troubleshooting
TES501_Heft1_RW.indb   20
14.09.2011   16:10:31