Cisco Cisco Virtualization Experience Client 2112 リリースノート
2
Cisco Virtualization Experience Client 2111/2211 Release Notes for ThreadX Release 3.3.1_327
OL-25196-01
The Cisco VXC 2111 attaches to the Cisco Unified IP Phone 8961 or 9971 through a spine connector
cable. The Cisco Unified IP Phone 8961 or 9971 must run Firmware Release 9.1(2) or 9.2(1).
cable. The Cisco Unified IP Phone 8961 or 9971 must run Firmware Release 9.1(2) or 9.2(1).
The Cisco VXC 2211 operates independently and is powered by either an AC adapter or by Power over
Ethernet (PoE) capable Cisco Switches.
Ethernet (PoE) capable Cisco Switches.
Related Documentation
For more information, see the documents available at the following URLs:
Cisco Virtualization Experience Client 2000 Series
http://www.cisco.com/en/US/products/ps11499/tsd_products_support_series_home.html
Cisco Virtualization Experience Client Manager
http://www.cisco.com/en/US/products/ps11582/tsd_products_support_series_home.html
Installation Notes
For installation instructions, see the Quick Start Guide: Cisco Virtualization Experience Client (VXC)
2111/2211.
2111/2211.
Important Notes
This section provides general information about using and supporting the Cisco Virtualization
Experience Client 2111/2211 (PCoIP) in your system:
Experience Client 2111/2211 (PCoIP) in your system:
•
Compatibility
Release 3.3.1_327 is compatible with both VMware View™ 4.5 and View 4.6 deployments using Cisco
VXC client devices to connect to View virtual desktops. However, it is recommended that View 4.6 with
release 3.3.1_327 be used for better performance.
VXC client devices to connect to View virtual desktops. However, it is recommended that View 4.6 with
release 3.3.1_327 be used for better performance.
Note
The firmware version can be viewed on the Info > Version web page for the device.