Cisco Cisco Virtualization Experience Client 2112 リリースノート

 lists the known issues associated with the Cisco VXC 2111/ 2211. 

This section contains these topics:

Known problems (bugs) are graded according to severity level. These release notes contain descriptions 
of:

All severity level 1 or 2 bugs.

Significant severity level 3 bugs.

You can search for problems by using the Cisco Software Bug Toolkit.

To access Bug Toolkit, you need the following items:

Internet connection

Web browser

Cisco.com user ID and password

If you switch the connected power source from inline power to a Cisco Power Cube 
4, the Cisco VXC is unable to power a USB key. 

After you connect the power supply, 
disconnect and then reconnect the 
Ethernet cable connection to the Cisco 
VXC client.

When the Cisco VXC client is set to 100 MB Full Duplex mode, the switch console 
displays 100 MB Half Duplex. 

Configure the speed and duplex settings 
on the Cisco VXC client and the switch 
port to the same values.

The Windows 7 remote desktop shuts down when a USB camera is attached to a 
Cisco Unified IP Phone 9971 that is connected to a Cisco VXC 2111 (not applicable 
for Cisco VXC 2211). 

Connect an external power source 
(Cisco Power Cube 4) to the Cisco 
Unified IP Phone 9971.

If you move your monitor connection from one DVI port to the other, the screen 
resolution can change. 

Use the default port for a single monitor 
(outer port for Cisco VXC 2111 
integrated, or bottom port for Cisco 
VXC 2211 standalone).

Changing the resolution on the local Cisco VXC client does not change the 
resolution on the monitor. 

Connect to the remote desktop and 
verify the resolution.