Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス
56
cdma pdsn pcf default closed-rp
cdma pdsn pcf default closed-rp
To enable the Closed-RP interface feature on the PDSN, use the cdma pdsn pcf default closed-rp
command in global configuration mode. Use the no form of the command to disable the Closed-RP
interface feature.
command in global configuration mode. Use the no form of the command to disable the Closed-RP
interface feature.
cdma pdsn pcf default closed-rp
no cdma pdsn pcf default closed-rp
Syntax Description
There are no arguments or keywords for this command.
Defaults
The default setting is that Closed-RP is disabled.
Command Modes
Global configuration
Command History
Usage Guidelines
When the cdma pdsn pcf default closed-rp command is configured, the Closed-RP interface feature is
enabled on the PDSN. All the PCF's connecting to the PDSN will be considered as Closed-RP PCF's.
When this command is configured the 3GPP2 (Open) RP interface will be disabled on the PCF.
enabled on the PDSN. All the PCF's connecting to the PDSN will be considered as Closed-RP PCF's.
When this command is configured the 3GPP2 (Open) RP interface will be disabled on the PCF.
Examples
The following example illustrates the cdma pdsn pcf default closed-rp command:
Router (config)# cdma pdsn pcf default closed-rp
Release
Modification
12.3(14)YX
This command was introduced.