Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス

To enable the active PDSN to synchronize the session and flow related data to its standby peer, use the 
cdma pdsn redundancy command in global configuration mode. Use the no form of the command to 
disable this function.

There are no arguments or keywords for this command.

The default setting is that PDSN redundancy is disabled.

Global configuration

The following example illustrates the cdma pdsn redundancy command:

Router (config)# cdma pdsn redundancy

12.3(14)YX

This command was introduced.