Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス

To specify the maximum number of times an A11 Registration Update message is retransmitted, use the 
cdma pdsn retransmit a11-update command in global configuration mode. To return to the default of 
5 retransmissions, use the no form of this command.

cdma pdsn retransmit a11-update number

5 retransmissions.

Global Configuration

PDSN may initiate the release of an A10 connection by sending an A11 Registration Update message to 
the PCF. In this case, the PCF is expected to send an A11 Registration Acknowledge message followed 
by an A11 Registration Request with Lifetime set to 0. If PDSN does not receive an A11 Registration 
Acknowledge or an A11 Registration Request with Lifetime set to 0, or if it receives an A11 Registration 
Acknowledge message with an update denied status, PDSN retransmits the A11 Registration Update. 
The number of retransmissions is 5 by default and is configurable using this command.

The following example specifies that A11 Registration Update messages will be retransmitted a 
maximum of 9 times:

cdma pdsn retransmit a11-update 9

Maximum number of times an A11 Registration Update message is 
retransmitted. Possible values are 0 through 9. The default is 5 
retransmissions.

12.1(3)XS

This command was introduced.

Specifies A11 Registration Update message timeout.

Displays debug messages for A11 interface errors, events, and 
packets.

Displays the current status and configuration of the PDSN gateway.