Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス

To send the Cisco VSA (cdma-rfswact) in first interim/stop record after switchover, use the cdma pdsn 
redundancy accounting send vsa swact command in Global configuration mode. To disable this 
feature, use the no form of the command.

There are no keywords or arguments for this command.

By default, this command is disabled.

Global configuration

After a switchover takes place, the first interim or stop accounting record (as appropriate) includes a 
VSA (cdma-rfswact) indicating that a switchover has occurred. The inclusion of this VSA is controllable 
through this CLI. 

If periodic syncing is enabled, you cannot configure the cdma pdsn redundancy accounting send vsa 
swact command, and vice-versa, as the two approaches are mutually exclusive. 

Neither the cdma pdsn redundancy accounting send vsa swact command, or periodic syncing can be 
configured if the cdma pdsn redundancy command is not configured.

The following example illustrates the cdma pdsn redundancy accounting send vsa swact command:

Router(config)# cdma pdsn redundancy accounting send vsa swact

12.3(14)YX

This command was introduced.