Cisco Cisco ASA 5512-X Adaptive Security Appliance

This section describes the system requirements for using the ASA 1000V and includes the following 
topics:

Before you install the ASA 1000V, the following components must already be installed and configured:

An x86 Intel server with a 64-bit processor, listed in the VMware Hardware Compatibility List, 
which runs VMware vSphere Hypervisor software 4.1 or 5.0 with a minimum of two processors of 
at least 1.5 GHz each, 8 GB of physical RAM, and 30 GB of disk space, with an Enterprise Plus 
license

VMware vCenter 4.1 or 5.0 to manage the VMware vSphere Hypervisor, with an Enterprise Plus 
license

Cisco Nexus 1000V Distributed Virtual Switch (DVS), version 4.2(1)SV1(5.2), created in VMware 
vCenter 

Cisco Nexus 1000V Virtual Ethernet Module (VEM) installed and running in the VMware vSphere 
Hypervisor host

IPv6

Not supported

Multiple contexts

Not supported.

NetFlow

Not supported.

PPPoE/VPDN

Not supported.

QoS

Not supported.

Redundant interfaces, EtherChannel interfaces, 
and subinterfaces

Not supported.

Threat detection

Not supported.

Transparent mode

Not supported.

Unified communications 

Not supported. (Includes TLS Proxy, Phone Proxy, Proxy Limit, and 
IME.)

URL filtering

Not supported.

VPN remote access

Not supported. (Includes Remote Access, Clientless (SSL) Access, 
Multi-site (SSL) Access, Easy VPN on the ASA 5505, VPN Phones, 
AnyConnect Essentials, and AnyConnect Mobile.)

WCCP

Not supported.