Cisco Cisco ASA 5512-X Adaptive Security Appliance
5
Release Notes for the Cisco ASA 1000V, Version 8.7(x)
New Features
•
CLI—In privileged EXEC mode, enter the dir command. The amounts of total and available flash
memory appear at the bottom of the output.
memory appear at the bottom of the output.
DRAM, Flash Memory, and Failover
In a failover configuration, the two ASA 1000V instances must have the same amount of assigned
DRAM.
DRAM.
ASA 1000V and ASDM Compatibility
lists information about the ASA 1000V and ASDM compatibility.
New Features
Note
New, changed, and deprecated syslog messages are listed in the syslog messages guide.
Released: October 16, 2012
Table 3
lists the new features for ASA Version 8.7(1.1).
Note
Version 8.7(1) was removed from Cisco.com due to build issues; please upgrade to Version 8.7(1.1) or
later.
later.
Table 2
ASA 1000V and ASDM Compatibility
Application
Description
ASDM
ASA 1000V Version 8.7(1.1) requires ASDM Version 6.7(1).
For information about ASDM requirements for other releases, see Cisco ASA Compatibility at:
Table 3
New Features for ASA Version 8.7(1.1)
Feature
Description
Platform Features
Support for the ASA 1000V
We introduced support for the ASA 1000V for the Nexus 1000V switch.
Cloning the ASA 1000V
You can add one or multiple instances of the ASA 1000V to your deployment using the method
of cloning VMs.
of cloning VMs.
Management Features
ASDM mode
You can configure, manage, and monitor the ASA 1000V using the Adaptive Security Device
Manager (ASDM), which is the single GUI-based device manager for the ASA.
Manager (ASDM), which is the single GUI-based device manager for the ASA.
VNMC mode
You can configure and manage the ASA 1000V using the Cisco Virtual Network Management
Center (VNMC), which is a GUI-based multi-device manager for multiple tenants.
Center (VNMC), which is a GUI-based multi-device manager for multiple tenants.