Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch インストールガイド

Thank you for choosing the Cisco 200 Series Smart Switch, a Cisco 
network communications device. This device is designed to be 
operational right out-of-the-box as a standard bridge. In the default 
configuration, it will forward packets between connecting devices after 
powered up. 

Before you begin installing the switch, make sure you have all of the 
package contents available, access to the 

Cisco 200 Series Smart Switch 

Administration Guide

, and a PC with a web browser for using web-based 

system management tools.

• Cisco 200 Series Smart Switch

• Rackmount Kit

• Power Cord or Adapter

• This Quick Start Guide

• Product CD

This guide will familiarize you with the layout of the smart switch and 
describe how to deploy the device in your network. For additional 
information, see 

.

There are two ways to mount the switch:

• Set the switch on a flat surface.

• Mount the switch in a standard rack (1 rack unit high). 

Do not mount the device in a location where any of the following conditions 
exist:

• High Ambient Temperature—The ambient temperature must not 

exceed 104 degrees Fahrenheit (40 degrees Centigrade).

Some switches have a higher temperature rating. The SG200-

10FP, SF200-24FP, SG200-26FP, and SG200-50FP are rated at 113 
degrees Fahrenheit (45 degrees Centigrade).

• Reduced  Air  Flow—Both side panels must be unobstructed to prevent 

overheating.

• Mechanical Overloading—The device must be level, stable, and 

secure to prevent it from sliding or shifting out-of-position.