Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch インストールガイド
4
Cisco 200 Series Smart Switches
Connecting Network Devices
To connect the smart switch to the network:
S
TEP
1
Connect the Ethernet cable to the Ethernet port of a computer,
printer, network storage, or other network device.
printer, network storage, or other network device.
S
TEP
2
Connect the other end of the Ethernet cable to one of the
numbered smart switch Ethernet ports.
numbered smart switch Ethernet ports.
The LED of the port lights if the device connected is active. Refer to
for details
about the different ports and LEDs on each switch.
S
TEP
3
Repeat
Step 1
and
the smart switch.
N
OTE
Cisco strongly recommends using Cat5 or better cable for Gigabit
connectivity. When you connect your network devices, do not exceed
the maximum cabling distance of 100 meters (328 feet). It can take up to
one minute for attached devices or the LAN to be operational after it is
connected. This is normal behavior.
the maximum cabling distance of 100 meters (328 feet). It can take up to
one minute for attached devices or the LAN to be operational after it is
connected. This is normal behavior.
2