Samsung SNC-L200WP ユーザーズマニュアル

Netcam(W)_SNC-L200(W)

Network Configuration

Set the port number used to access the Netcam(W) over the Internet, and set the
display of the Netcam(W) icon in the “My Network Places.”

UPnP Configuration

Port Forwarding: Select the method of port number allocation. “Enable” is automatic
allocation, and “Disable” is not allocating the port number. “User Define” is the user
entering the port number.

Display a shortcut Icon in My Network Places: Decide whether to display the
SNC-L200(W) icon of the “My Network Places.”

UPnP Status (Select the settings of item 1 and 2 above and click Apply to display it)

- Status: Display the status of the UPnP.When succeeding, “Success” is displayed. When

failing, “Error” is displayed.

- Port No.: Display the allocated port number.

- Router Global Address: Display the router of the Global IP.

- Camera ‘s address for Local Network Access: Display the address with which the user

can access the Netcam(W) over the network.

- Camera ‘s address for Access via Internet: Display the address with which the user

can access Netcam(W) from external Internet.

1
2

For the SNC-L200(W)icon of “My
Network Places,”Windows XP
Service Pack 2 must be installed.
And the “UPnP

Framework ”in the exception tab of
“Controller-Windows Firewall ”must
be checked.

You can access the Netcam(W) by
double clicking the SNC-L200(W)
icon of “My Network Places.”

Note

Port number used to access the Netcam(W) over the Internet.

Network Port Configuration

Common Status: Display the status

of the Gateway and the DNS.

LAN Status: Display the status of the

IP address, the Netmask and the Mac

address.

PPPoE Status: Display the

connection status of the

ADSL(PPPoE).

Check the current connection status of the network.

View Network Status

The Common Status is information commonly used for all the
interfaces (Ethernet of PPPoE).

Note