Samsung SNC-L200WP ユーザーズマニュアル
Netcam(W)_SNC-L200(W)
67
Netcam(W)_SNC-L200(W)
66
Utilities
< Utility Sub Menu >
- Save Configuration: Store the
settings in flash memory.
- Reboot: Re-boot the system.
- Factory Default: Restore the
settings to factory default.
- System Update: Update the
system.
- To store settings in the memory, click
the Save Button.
Store the settings in the memory of Netcam(W),and save them when power is
turned off or the system is re-booted.
turned off or the system is re-booted.
Save Configuration
Reboot the system so that settings are applied to
the Netcam(W). Reboot the system after using the
“Save Configuration” or “System Update.”
the Netcam(W). Reboot the system after using the
“Save Configuration” or “System Update.”
Reboot
Press the Reset Button on the back of the Netcam(W) for more than
5 seconds to return to default settings. Then, settings stored in
memory are erased.
5 seconds to return to default settings. Then, settings stored in
memory are erased.
Note
Connection with the
Netcam(W) is cut during
rebooting.
Close Internet Explorer, and
Close Internet Explorer, and
access the Internet again
after 1 minute.
Warning
Used to restore settings to factory
default.
default.
Factory Default
Do not use this function
unless necessary. All the
stored settings are
switched to factory default.
unless necessary. All the
stored settings are
switched to factory default.
Warning
You can update firmware in two ways.
- Normal Update: Update to the latest
version of software for improving
performances.
performances.
- All Update: Seldom used. It updates
the system to repair a serious defect
such as program bug.
such as program bug.
System Update