Samsung SMO-210TRP ユーザーズマニュアル

You may encounter an unexpected problem while using this system that
makes it hard to use the system properly. In many cases, however, they are
minor problems rather than serious flaws in the system. 
Refer to the following tips for some possible solutions. 

If the problem persists, contact the local sales representative or service
center for support. 

Note
If the problem is related to VCR recording or playback, check the VCR
as well. 

When power will not come on

When the screen does not appear 

When record is not working 

When playback is not working

When the screen does not appear
in the Auto Sequence Switch
Mode 

•   Make sure that the cord is

properly plugged in.

•   Check the power cable.

•   Check the connections with  

the camera, accessories and the
external monitor.

•   Make sure the Video In port 

of the VCR and the VCR
Accessory Video Out port of this
system are properly connected. 

•   Check if the tape inserted into

the VCR is  able to record.  

•   Check that the REC Trigger Out

port of the Time Lapse VCR is
properly connected  to the VCR
Accessory TRIGGER (6PIN
VCR ACCESSORY) port of this
system when you record in the
Time Lapse Mode.

•   Make sure the Video Out port of

the VCR and the VCR Accessory
Video In port of this system  are
properly connected. 

•   Check if the Display Mode of

this system is in P.B. Mode or
Triplex Mode.

•   Check that the screen is in Live

Mode.

•   Check that the time of

“SEQUENCE” under the SETUP
MENU is properly set.

Eng-17