Samsung SNC-C6225P ユーザーズマニュアル
28 – 10x Network Mini Smart Dome Camera
how to use osd menu
DISPLAY
[ON/OFF]
Sets if camera makes mask shows or not on images.
CLEAR [CANCEL/OK]
Deletes data in the selected mask NO.
Privacy Zone Area Setup
Move camera to area to mask. Then the menu to
adjust mask size will be displayed.
adjust mask size will be displayed.
Privacy Zone Size Adjustment
Adjust mask size. Use joystick or arrow buttons to
adjust mask size.
adjust mask size.
◄ ► (Left/Right)
Adjusts mask width.
▲▼ (Up/Down)
Adjusts mask height.
To hide a certain zone completely regardless of high speed PT
motions, it is recommended that the size of mask must be 20%
bigger than original target size.
motions, it is recommended that the size of mask must be 20%
bigger than original target size.
It is noted that during PAN/TILT control like jog action, the
object behind the privacy mask can be disclosed in a short
period of time.
object behind the privacy mask can be disclosed in a short
period of time.
•
•
❖
❖
•
•
•
MOTION SETUP
Setup the general functions of Pan/Tilt motions.
PRESET LOCK
[ON/OFF]
If Preset Lock is set to ON, it is impossible to set up
and delete Preset. It is possible only to run those
functions. To set up and delete those functions, enter
into OSD menu.
and delete Preset. It is possible only to run those
functions. To set up and delete those functions, enter
into OSD menu.
PWR UP ACTION
[ON/OFF]
Refer to “Other Functions”(page 23) section.
D-FLIP [ON/OFF]
Refer to “Other Functions”(page 23) section.
JOG MAX SPEED [2°/sec ~200°/sec]
Sets maximum jog speed. Jog speed is inversely
proportional to ratio of zoom. As zoom magnifi cation
goes up, pan/tilt speed goes down.
proportional to ratio of zoom. As zoom magnifi cation
goes up, pan/tilt speed goes down.
JOG DIRECTION
[INVERSE/NORMAL]
If you set this to ‘Normal’, the view in the screen is
moving same direction with jog tilting. If ‘Inverse’ is
selected, the view in the screen is moving reversely.
moving same direction with jog tilting. If ‘Inverse’ is
selected, the view in the screen is moving reversely.
IMAGE HOLD
[ON/OFF]
At start point of preset movement, camera starts
freezing the image of start point. Camera keeps
displaying the image of start point during preset
movement and does not display the images which
camera gets during preset movement. As soon as
camera stops at preset end point, camera starts
displaying live images which it gets at preset end
point.
freezing the image of start point. Camera keeps
displaying the image of start point during preset
movement and does not display the images which
camera gets during preset movement. As soon as
camera stops at preset end point, camera starts
displaying live images which it gets at preset end
point.
•
•
•
•
•
•
EDIT MASK 1
[◄►:ADJUST MASK WIDTH]
[▲▼:ADJUST MASK HEIGHT]
[ENTER : SELECT]
[▲▼:ADJUST MASK HEIGHT]
[ENTER : SELECT]
EDIT MASK 1
MOVE TO TARGET POSITION
[ENTER : SELECT]
[ENTER : SELECT]
0/0/x1/N
MOTION SETUP
PRESET LOCK
OFF
PWR UP ACTION
ON
D-FLIP ON
JOG MAX SPEED
JOG MAX SPEED
140/SEC
JOG DIRECTION
NORMAL
IMAGE HOLD
OFF
<PARKING ACTION SETUP>
BACK
EXIT
EXIT