Samsung SNC-C6225P ユーザーズマニュアル

English – 29

how to use osd menu

If Park Enable is set to ON, camera runs assigned 
function automatically if there is no PTZ command 
during assigned “WAIT TIME”.

PARK ENABLE 

[ON/OFF]

WAIT TIME 

 

[5 sec ~ 4 hour]

The time is displayed with “hh:mm:ss” format and 
you can change this by 1 sec unit.

PARK ACTION

[HOME/PRESET/PATTERN/AUTOPAN/SCAN]

ex) If HOME is selected for Park Action, camera 
will move to home position when there is no PTZ 
command during assigned “WAIT TIME”.

Confi gure 5 Special Functions with this menu.

PRESET SETUP

127 Presets from the number 1 to 128 can be 
assigned excluding preset 95 reserved for Menu.

AUTO PAN SETUP

Up to 8 Auto Pans are available, which makes camera 
to move slowly between two preset points.

❖

•

•

•

•

•

PATTERN SETUP

Up to 4 patterns can be stored in the dome. 

In this function, path data created by manual move 
of Joystick are recorded and you can playback the 
identical path automatically whenever required.

SCAN SETUP

Up to 8 Scans can be defi ned. 

In a Scan, max 20 entities are assigned from any 
combinations of Preset/Auto Pan/Pattern. If you run a 
Scan, camera will execute each entry sequentially.

SCHEDULE SETUP

7 rules of Schedule can be assigned by day and time. 
Appropriate actions (such as Home, Preset, Auto Pan, 
Pattern and Scan) can be defi ned for each rule. Also, 
it is possible to use Weekday and Weekend in a rule 
to make it simple.

•

•

•

PARKING ACTION SETUP

PARK ENABLE 

OFF

WAIT TIME 

00:10:00

PARK ACTION 

HOME

BACK
EXIT

FUNCTION SETUP 

<PRESET SETUP>
<AUTO PAN SETUP>
<PATTERN SETUP>
<SCAN SETUP>
<SCHEDULE SETUP>

BACK
EXIT