Canon ir2016, ir2020 マニュアル

3-21

F-3-128

4) Remove the two RS tightening screws (M3 x 8) [1], and then remove the

finisher controller PCB [2] together with the mount.

F-3-129

5) Remove the timing belt [1].

F-3-130

1) Remove the stepped screw [1] (front side) and RS tightening screw (M3

x 8) [2], and then remove the inlet guide [3].

F-3-131

1) Remove the RS tightening screw (M3 x 8) [1]. Remove the two reusable

bands [2] using pliers or the like, and then remove the harness from the edge

saddle [3].

2) Remove the harness [5] from the guide [4], and then remove the front cov-

er safety switch [6].

F-3-132

1) Disconnect the two connectors [1] from the stapler. Remove the RS tight-

ening screw [2], and then remove the stapler [3].

F-3-133

1) Remove the two binding screws (M4 x 4) [1]. Open the wire saddle [2].

Remove the harness from the guide [3], and then remove the paper holder so-

lenoid [4].

F-3-134

[5]

[4]

[1]

[2]

[1]

[1]

[3]

[2]

[5]

[2]

[6]

[4]

[3] [1]

[1]

[3]

[2]

[3]

[2]

[4]

[1]