AMX design xpress home theater v1.3 ユーザーガイド

 

When you select a desired CD/DVD model from the Control Logic field, the changer size 

is automatically filled and is read-only.

 

The control method(s) available for selection depend on the device type specified.

Select the required baud rate for the serial device from the Baud Rate drop-down list. (if 

applicable).

To add a device to your system, click the Add button in the System Information dialog. This opens 

the Device Configuration dialog - Device Data tab. 

In the Source Configuration dialog (Source Data tab):

Select the type of equipment you are adding from the Source Type drop-down list.

Enter a name for the device in the Display Name field. This is the name for the device that will 

appear on the touch panel. 

If the device is a Compact Disc Player or Digital Video Disc player, specify the size of the disc 

changer (if applicable; by default this field is set to 1).

Use the radio buttons to select IP as the Control Method associated with the new device.

Enter the IP Address of the ethernet-controlled device.

To add a MAX-IMS or MAX-MMS server to your system, Click the Add button in the System 

Information dialog to open the Device Configuration dialog - Device Data tab.

Select AMX MAX from the Source Type drop-down list.

Enter a name for the device in the Display Name field. This is the name for the device that will 

appear on the touch panel.

Select the Control Logic, based on which type of MAX server you are adding (either IMS or 

MMS).

In the IP Data field, enter the MAX server's IP Address.

Select an Output Zone number, which must be unique per each server used in a project. For 

example, if a system has two MMS servers, each MMS could have an Output Zone 1.

The valid ranges are:

 

MAX-IMS = 1 to 8

 

MAX-MMS = 1 to 25